.gitignore

@@ -9,6 +9,7 @@ lerna-debug.log*
 .VSCodeCounter
 .vscode
 .vscode/*
+config.json
 log.txt
 nohup.out
 data/config.db
@@ -110,4 +111,3 @@ dist
 
 # TernJS port file
 .tern-port
-package-lock.json

README.md

@@ -1,6 +1,106 @@
-# Hestia Control Panel Frontend
-This is the web frontend for the Hestia Control Panel. Checkout `v2-back` for the backend.
+# Hestia
+Node.js Raspberry Pi Pellet Stove Controller, named after the Greek virgin goddess of the hearth.
 
-# Features
-* Realtime state updates and communication via MQTT broker
-* Easily hosted separate from the backend
+# About
+This project seeks to replace the OEM control panel on a Lennox Winslow PS40 pellet stove with a Raspberry Pi. I will be utilizing a Raspberry Pi Zero W, relays, and switches already installed on the pellet stove. I chose a Pi Zero W for its small form factor, the lack of pre-installed headers, its wireless connectivity, and familiarity with the platform. I had previously used an Arduino Nano for a much more rudimentary version of this project and found great difficulty in making adjustments to the code. Additionally the Raspberry Pi platform will allow for expansion in the future to include IoT controls and logging of usage utilizing networked databases. The project will be written using Node.js and the rpi-gpio Node module. I've chosen Node.js for its familiarity as well as ease of implementation of a web server for future expansion.
+
+# GPIO
+Three GPIO pins are used along with a common ground to control three relays, supplying 120VAC power to the igniter and combustion blower when appropriate, and supplying power to the auger motor in pulses. Two more GPIO pins are used to detect open/closed status of a temperature-controlled snap switch and a vacuum switch. Another temperature-controlled snap switch is used to supply power to the convection motor when the pellet stove has reached a suitable temperature. A final temperature-controlled snap switch us used to interrupt the circuit for the auger motor to shut the stove off when an over-temperature condition is met. I will be utilizing a OneWire DS18B20 temperature sensor to detect the temperature of air exiting the stove vents.
+
+| Pi Pin | Function | Direction | Wire Color |
+| ------:| -------- | --------- | ---------- |
+7 | Auger Relay | Out | Blue
+13 | Igniter Relay | Out | Blue/White
+15 | Combustion Blower Relay | Out | Orange
+16 | Proof of Fire Switch | In | Orange/White
+18 | OneWire Temp Sensor | In | Brown
+22 | Vacuum Switch | In | Brown/White
+4 | +5VDC for Switches | N/A | Green
+6 | GND for Relays | N/A | Green/White
+
+# Schematics
+## The Current Setup
+![Current Schematic](/assets/currentschem.png)
+
+## The End Goal
+![Future Schematic](/assets/futureschem.png)
+
+# Oddities
+For ease of adaption, connection, and prototyping I've decided to use Cat 5 ethernet cabling and RJ45 connectors to connect the Raspberry Pi to the stove, and to a breadboard mockup of the sensors and switches for testing.
+
+# Environment Variables
+* ONTIME - How long to turn the auger on, in milliseconds.  
+* OFFTIME - How long to wait between turning the auger on, in milliseconds.  
+* PAUSETIME - How long to pause when a `pause` file is detected, in milliseconds.  
+* DEBUG - Displays extra log information when set to `true`
+
+# Controls
+* Run with `node main.js > log.txt &` to launch it in the background, piping output to a file `log.txt` which can be read from later.  
+* Pause the script by creating a file named `pause` in the root directory.  
+* Reload the environment variables by creating a file named `reload` in the root directory.  
+* Quit the script by creating a file named `quit` in the root directory.
+
+# Roadmap
+* v0.1 - Get the pellet stove operating at a basic level. Only implements the auger relay and no safeties.
+* v0.2 - Implement safety switches and put the igniter and combustion blowers on relays controlled by the Pi.
+* v0.3 - Implement the HTTP module to allow controlling the stove from the LAN.
+* v0.4 - Implement usage logging with a SQL database.
+
+# Testing Procedure
+1. Launch app, check startup messages, check that it idles and pauses properly.
+2. Provide ignite command, observe if the igniter, blower, and auger get turned on. Make sure the igniter turns off after the pre-set time.
+3. Test that the following conditions cause a shutdown:
+    * Proof of Fire Switch OPEN after igniter shutoff.
+    * Vacuum Switch OPEN after igniter start.
+4. Test manipulation of feed rates.
+5. Test shutdown sequence.
+
+# SQLite Database Tables
+
+## status
+| Field | Type | Null | Key | Default | Extra |
+| ----- | ---- | ---- | --- | ------- | ----- |
+| id | int(10) | No | PRI | NULL | auto_increment |
+| key | varchar(100) | No |   |   |
+| value | varchar(1000) | No |   |   |
+
+| id | key | value |
+| -- | --- | ----- |
+0 | igniter | 0
+1 | blower | 0
+2 | auger | 0
+3 | igniter_finished | false
+4 | shutdown_initiated | 0
+5 | vacuum | 0
+6 | proof_of_fire | 0
+7 | shutdown_next_cycle | 0
+
+## timestamps
+| Field | Type | Null | Key | Default | Extra |
+| ----- | ---- | ---- | --- | ------- | ----- |
+| id | int(10) | No | PRI | NULL | auto_increment |
+| key | varchar(100) | No |   |   |
+| value | varchar(1000) | No |   |   |
+
+| id | key | value |
+| -- | --- | ----- |
+0 | process_start | 0
+1 | blower_on | 0
+2 | blower_off | 0
+3 | igniter_on | 0
+4 | igniter_off | 0
+
+## intervals
+| Field | Type | Null | Key | Default | Extra |
+| ----- | ---- | ---- | --- | ------- | ----- |
+| id | int(10) | No | PRI | NULL | auto_increment |
+| key | varchar(100) | No |   |   |
+| value | varchar(1000) | No |   |   |
+
+| id | key | value |
+| -- | --- | ----- |
+0 | auger_on | 600
+1 | auger_off | 1400
+2 | pause | 5000
+3 | igniter_start | 420000
+4 | blower_stop | 600000

TODO

@@ -0,0 +1,8 @@
+Logic Goal:
+
+1. Start Script & Web Server
+2. Await a command from the user.
+3. Startup enables auger
+4. If auger is enabled, run the cycle command.
+5. Once per cycle, read then rewrite the config file for interoperability
+6. Set feed rate based on config.

TODO.md

@@ -1,10 +0,0 @@
-# In Progress
-1. Commenting
-
-# Immediate To-Do
-1. Add logic for the feed rate
-2. Add a debug mode to the config and make console logs conditional
-
-# Roadmap
-1. Add backend logic to handle an automatic startup and shutdown
-2. Temperature reading

data/strings.json

@@ -0,0 +1,5 @@
+{
+    "database": {
+        "createConfigTable": ""
+    }
+}

hestia.sh

@@ -0,0 +1,93 @@
+#!/bin/bash
+#####################################################
+# Interactive script for managing Hestia Web Portal #
+#####################################################
+# Formatting Tips:
+# https://misc.flogisoft.com/bash/tip_colors_and_formatting
+# 
+# Formatting:
+# \e[1m - Bold
+# \e[2m - Dim
+# \e[8m - Hidden (passwords)
+#
+# Reset:
+# \e[0m - Reset All Attributes
+# \e[21m - Reset Bold/Bright
+# \e[22m - Reset Dim
+# \e[28m - Reset Hidden
+#
+# Colors:
+# \e[39m - Default Foreground Color
+# \e[30m - Black
+# \e[31m - Red
+# \e[32m - Green
+# \e[34m - Blue
+#####################################################
+
+# Some initial variables to work with
+timestamp=$(date "+%Y%m%d_%H%M")
+filename="backup_$timestamp.tar.gz"
+
+# Initial Prompt
+# Bash allows for linebreaks in string literals and will
+#   break lines accordingly in the shell
+echo -e "
+[ Hestia Control Panel ]
+  
+This script is being run from: '$(pwd)'
+Active Nodes: $(ps ax -o pid,user,command | grep 'node main.js' | grep -v grep)
+
+Please enter an option from below:
+
+  [1] Launch Hestia Web Portal
+  [2] Quit Hestia Web Portal
+  [3] View the logs
+  [4] Update Hestia
+  [5] Set up database
+  
+  [0] Quit Control Panel"
+
+# Wait for input
+read -p "Option: " opt
+
+# Execute the correct commands based on input.
+case "$opt" in
+	1)
+		# Launch Hestia Web Portal
+		clear
+		echo "Launching Hestia Web Portal"
+		nohup node main.js > log.txt &
+		;;
+	2)
+		# Quit Hestia Web Portal
+		clear
+		echo "Quitting Hestia Web Portal Gracefully"
+		touch quit
+		;;
+	3)
+		# View logs
+		clear
+		less +F log.txt
+		;;
+	4)
+		# Update Hestia
+		rm data/config.db
+		git pull
+		;;
+	5)
+		# Set up database
+		node modules/_setupdb.js
+		;;
+	0)
+		# Exit the script
+		clear
+		echo "Quitting..."
+		exit
+		;;
+	*)
+		clear
+		echo "Invalid Option!"
+		;;
+esac
+
+exec ./hestia.sh

main.js

@@ -0,0 +1,91 @@
+const fn = require('./modules/functions.js').functions;
+// Import the config file
+var config = require('./templates/config.json');
+// Database Functions
+const dbfn = require('./modules/database.js');
+// Web Portal
+const portal = require('./modules/_server.js');
+portal.start();
+
+dbfn.run(`UPDATE timestamps SET value = ${Date.now()} WHERE key = 'process_start'`).catch(err => console.error(`Error setting process start time: ${err}`));
+
+fn.commands.refreshConfig().then(res => {
+    if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res.status}`);
+    config = res.config;
+    // Setup for use with the Pi's GPIO pins
+    switch (process.env.ONPI) {
+        case 'true':
+            console.log(`== Running on a Raspberry Pi.`);
+            var gpio = require('rpi-gpio');
+            fn.init(gpio).then((res) => {
+                console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                main(gpio);
+            }).catch(rej => {
+                console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: Error during initialization: ${rej}`);
+                process.exit(1);
+            });
+            break;
+        case 'false':
+            console.log(`I: Not running on a Raspberry Pi.`);
+            var gpio = 'gpio';
+            fn.init(gpio).then(res => {
+                console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                main(gpio);
+            }).catch(rej => {
+                console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: Error during initialization: ${rej}`);
+                process.exit(1);
+            });
+            break;
+        default:
+            console.log(`[${Date.now() - config.timestamps.procStart}] E: Problem with ENV file.`);
+            process.exit(1);
+            break;
+    }
+}).catch(rej => {
+    console.error(`[${(Date.now() - config.timestamps.procStart)/1000}] E: Problem refreshing the config: ${rej}`);
+    process.exit(1);
+});
+
+function main(gpio) {
+    // If the auger is enabled
+    if (config.status.auger == 1) {
+        // Run a cycle of the auger
+        fn.auger.cycle(gpio).then(res => {
+            if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+            fn.checkForQuit().then(n => {
+                fn.commands.refreshConfig().then(res => {
+                    if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res.status}`);
+                    config = res.config;
+                    // Recursion ecursion cursion ursion rsion sion ion on n
+                    main(gpio);
+                }).catch(rej => {
+                    console.error(`[${(Date.now() - config.timestamps.procStart)/1000}] E: Problem refreshing the config: ${rej}`);
+                    // Recursion ecursion cursion ursion rsion sion ion on n
+                    main(gpio);
+                });
+            });
+        }).catch(err => {
+            if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: ${err}`);
+        });
+    } else {
+    // If the auger is disabled
+        fn.commands.pause().then(res => {
+            fn.checkForQuit().then(n => {
+                fn.commands.refreshConfig().then(res => {
+                    if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res.status}`);
+                    config = res.config;
+                    // Recursion ecursion cursion ursion rsion sion ion on n
+                    main(gpio);
+                }).catch(rej => {
+                    console.error(`[${(Date.now() - config.timestamps.procStart)/1000}] E: Problem refreshing the config: ${rej}`);
+                    // Recursion ecursion cursion ursion rsion sion ion on n
+                    main(gpio);
+                });
+            });
+        }).catch(err => {
+            if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: ${err}`);
+            // Recursion ecursion cursion ursion rsion sion ion on n
+            main(gpio);
+        });
+    }
+}

modules/_server.js

@@ -0,0 +1,83 @@
+/* Pellet Stove Control Panel
+ * Web Configuration Server
+ * v0.0.0 by Skylar Grant
+ * 
+ * TODOs: 
+    * Implement Express to make it easier
+    * Add actual data into the responses
+ */
+
+const express = require('express');
+const http = require('http');
+const fn = require('./functions.js').functions;
+var config;
+fn.commands.refreshConfig().then(newConfig => {
+    config = newConfig.config;
+});
+const { dbfn } = require('./functions.js');
+
+const app = express();
+const server = http.createServer(app);
+app.use(express.urlencoded());
+// Our root directory for the public web files
+app.use(express.static(__dirname + '/../www/public'));
+// Our directory for views used to render the pages
+app.set('views', __dirname + '/../www/views');
+// Set .html as the file extension for views
+app.engine('html', require('ejs').renderFile);
+app.set('view engine', 'html');
+
+// A normal load of the root page
+app.get('/', (req, res) => {
+    // if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${JSON.stringify(config)}`);
+    res.render('index', { config: JSON.stringify(config) });
+});
+
+// A POST form submission to the root page
+app.post('/', (req, response) => {
+    if (req.body.start != undefined) {
+        fn.commands.startup();
+        fn.commands.refreshConfig().then(res => {
+            config = res.config;
+            response.render('index', { config: JSON.stringify(config) });
+            return;
+        });
+    }
+    if (req.body.shutdown != undefined) {
+        fn.commands.shutdown();
+        fn.commands.refreshConfig().then(res => {
+            config = res.config;
+            response.render('index', { config: JSON.stringify(config) });
+            return;
+        });
+    }
+    if (req.body.reload != undefined) {
+        const updateAugerOffIntervalQuery = `UPDATE intervals SET value = '${2000 - req.body.feedRate}' WHERE key = 'auger_off'`;
+        const updateAugerOnIntervalQuery = `UPDATE intervals SET value = '${req.body.feedRate}' WHERE key = 'auger_on'`;
+        dbfn.run(updateAugerOffIntervalQuery).then(res => {
+            if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: Auger off interval updated: ${res.data.changes}`);
+            dbfn.run(updateAugerOnIntervalQuery).then(res => {
+                if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: Auger on interval updated: ${res.data.changes}`);
+                fn.commands.refreshConfig().then(res => {
+                    config = res.config;
+                    response.render('index', { config: JSON.stringify(config) });
+                    return;
+                });
+            }).catch(err => console.log(`E: ${err}`));
+        }).catch(err => console.log(`E: ${err}`));
+    }
+    if (req.body.quit != undefined) {
+        fn.commands.quit();
+        fn.commands.refreshConfig().then(res => {
+            config = res.config;
+            response.render('index', { config: JSON.stringify(config) });
+            return;
+        });
+    }
+});
+
+module.exports = {
+    start: () => {
+        server.listen(8080, "0.0.0.0");
+    }
+};

modules/_setupdb.js

@@ -0,0 +1,158 @@
+const dbfn = require('../modules/database.js');
+
+// Create `status` table
+/*
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | Field | Type          | Null | Key | Default | Extra          |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | key   | varchar(100)  | No   |     |         |                |
+    | value | varchar(1000) | No   |     |         |                |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+
+    + ------------------- +
+    | igniter             |
+    | blower              |
+    | auger               |
+    | igniter_finished    |
+    | shutdown_initiated  |
+    | vacuum              |
+    | proof_of_fire       |
+    | shutdown_next_cycle |
+    + ------------------- +
+
+CREATE TABLE IF NOT EXISTS status (
+    key varchar(100) NOT NULL,
+    value varchar(1000) NOT NULL
+);
+*/
+
+const createStatusTableQuery = "CREATE TABLE IF NOT EXISTS status (key varchar(100) NOT NULL,value varchar(1000) NOT NULL);";
+dbfn.run(createStatusTableQuery).then(res => {
+    console.log(res.status);
+    const statusEntries = {
+        igniter: 0,
+        blower: 0,
+        auger: 0,
+        igniter_finished: false,
+        shutdown_initiated: 0,
+        vacuum: 0,
+        proof_of_fire: 0,
+        shutdown_next_cycle: 0
+    };
+    for ( key in statusEntries ){
+        const insertStatusEntryQuery = `INSERT INTO status (key, value) VALUES ("${key}", "${statusEntries[key]}")`;
+        dbfn.run(insertStatusEntryQuery).then(res => {
+            console.log(`${res.status}: ${res.data.lastID}: ${res.data.changes} changes`);
+        }).catch(err => console.error(err));
+    }
+    const selectAllStatusEntriesQuery = "SELECT * FROM status";
+    dbfn.all(selectAllStatusEntriesQuery).then(res => {
+        console.log(res.status);
+    }).catch(err => console.error(err));
+}).catch(err => {
+    console.error(err);
+});
+
+// Create `timestamps` table
+/*
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | Field | Type          | Null | Key | Default | Extra          |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | key   | varchar(100)  | No   |     |         |                |
+    | value | varchar(1000) | No   |     |         |                |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+
+    + ------------- +
+    | process_start |
+    | blower_on     |
+    | blower_off    |
+    | igniter_on    |
+    | igniter_off   |
+    + ------------- +
+
+CREATE TABLE IF NOT EXISTS timestamps (
+    key varchar(100) NOT NULL,
+    value varchar(1000) NOT NULL
+);
+*/
+
+const createTimestampsTableQuery = "CREATE TABLE IF NOT EXISTS timestamps (key varchar(100) NOT NULL,value varchar(1000) NOT NULL);";
+dbfn.run(createTimestampsTableQuery).then(res => {
+    console.log(res.status);
+    const timestampsEntries = {
+        process_start: 0,
+        blower_on: 0,
+        blower_off: 0,
+        igniter_on: 0,
+        igniter_off: 0
+    };
+    for ( key in timestampsEntries ){
+        const insertTimestampsEntryQuery = `INSERT INTO timestamps (key, value) VALUES ("${key}", "${timestampsEntries[key]}")`;
+        dbfn.run(insertTimestampsEntryQuery).then(res => {
+            console.log(`${res.status}: ${res.data.lastID}: ${res.data.changes} changes`);
+        }).catch(err => console.error(err));
+    }
+    const selectAllTimestampsEntriesQuery = "SELECT * FROM timestamps";
+    dbfn.all(selectAllTimestampsEntriesQuery).then(res => {
+        console.log(res.status);
+    }).catch(err => console.error(err));
+}).catch(err => {
+    console.error(err);
+});
+
+// Create `intervals` table
+/*
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | Field | Type          | Null | Key | Default | Extra          |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+    | key   | varchar(100)  | No   |     |         |                |
+    | value | varchar(1000) | No   |     |         |                |
+    + ----- + ------------- + ---- + --- + ------- + -------------- +
+
+    + ------------- +
+    | auger_on      |
+    | auger_off     |
+    | pause         |
+    | igniter_start |
+    | blower_stop   |
+    + ------------- +
+
+CREATE TABLE IF NOT EXISTS intervals (
+    key varchar(100) NOT NULL,
+    value varchar(1000) NOT NULL
+);
+*/
+
+const createIntervalsTableQuery = "CREATE TABLE IF NOT EXISTS intervals (key varchar(100) NOT NULL,value varchar(1000) NOT NULL);";
+dbfn.run(createIntervalsTableQuery).then(res => {
+    console.log(res.status);
+    const intervalsEntries = {
+        auger_on: 600,
+        auger_off: 1400,
+        pause: 5000,
+        igniter_start: 420000,
+        blower_stop: 600000
+    };
+    for ( key in intervalsEntries ){
+        const insertIntervalsEntryQuery = `INSERT INTO intervals (key, value) VALUES ("${key}", "${intervalsEntries[key]}")`;
+        dbfn.run(insertIntervalsEntryQuery).then(res => {
+            console.log(`${res.status}: ${res.data.lastID}: ${res.data.changes} changes`);
+        }).catch(err => console.error(err));
+    }
+    const selectAllIntervalsEntriesQuery = "SELECT * FROM intervals";
+    dbfn.all(selectAllIntervalsEntriesQuery).then(res => {
+        console.log(res.status);
+    }).catch(err => console.error(err));
+}).catch(err => {
+    console.error(err);
+});
+
+// Show the tables to confirm they were created properly:
+
+dbfn.showTables().then(res => {
+    res.rows.forEach(row => {
+        console.log("Table: " + JSON.stringify(row));
+    });
+}).catch(err => {
+    console.error(err);
+});

modules/database.js

@@ -0,0 +1,53 @@
+const sqlite3 = require('sqlite3').verbose();
+
+const db = new sqlite3.Database('./data/config.db', (err) => {
+    if (err) throw `E: DB Connection: ${err.message}`;
+    console.log(`I: Connected to the database.`);
+});
+
+module.exports = {
+	run(query) {
+		return new Promise((resolve, reject) => {
+			db.serialize(() => {
+				db.run(query, function(err) {
+					if (err) {
+						reject("Problem executing the query: " + err.message);
+						return;
+					}
+					resolve( { "status": "Query executed successfully: " + query, "data": this });
+				});
+			});
+		});
+	},
+	all(query) {
+		return new Promise((resolve, reject) => {
+			db.serialize(() => {
+				db.all(query, (err, rows) => {
+					if (err) {
+						reject("Problem executing the query: " + err.message);
+						return;
+					}
+					// [ { key: 'key_name', value: '0' }, { key: 'key_name', value: '0' } ]
+					let organizedRows = {};
+					rows.forEach(row => {
+						organizedRows[row.key] = row.value;
+					});
+					resolve({ "status": "Query executed successfully: " + query, "rows": organizedRows });
+				});
+			});
+		});
+	},
+	showTables() {
+		return new Promise((resolve, reject) => {
+			db.serialize(() => {
+				db.all("SELECT name FROM sqlite_master WHERE type='table'", (err, rows) => {
+					if (err) {
+						reject("Problem executing the query: " + err.message);
+						return;
+					}
+					resolve({ "status": "Tables retreived successfully", "rows": rows });
+				});
+			});
+		});
+	}
+};

modules/functions.js

@@ -0,0 +1,292 @@
+// TODOs: Add tests for PoF and Vacuum switches, add delays for shutting down blower, test logic for igniter
+// TODO: Move these to config
+// Physical Pin numbers for GPIO
+const augerPin = 7;         // Pin for controlling the relay for the pellet auger motor.
+
+// Require the package for pulling version numbers
+const package = require('../package.json');
+// Database Functions
+const dbfn = require('./database.js');
+
+
+// Get environment variables
+const dotenv = require('dotenv').config();
+// Module for working with files
+const fs = require('fs');
+const { exec } = require('child_process');
+var config = require('../templates/config.json');
+
+
+// The functions we'll export to be used in other files
+const functions = {
+    auger: {
+        // Gets called once the Auger Pin has been setup by rpi-gpio
+        ready(err) {
+            if (err) throw err;
+            console.log('Auger GPIO Ready');
+            return;
+        },
+        // Turns the auger on (Pin 7 high)
+        on(gpio) {
+            return new Promise((resolve) => {
+                if (process.env.ONPI == 'true') {
+                    gpio.write(augerPin, true, function (err) {
+                        if (err) throw err;
+                        resolve('Auger turned on.');
+                    });
+                } else {
+                    resolve('Simulated auger turned on.');
+                }
+            });
+
+        },
+        // Turns the auger off (pin 7 low)
+        off(gpio) {
+            return new Promise((resolve) => {
+                if (process.env.ONPI == 'true') {
+                    gpio.write(augerPin, false, function (err) {
+                        if (err) throw err;
+                        resolve('Auger turned off.');
+
+                    });
+                } else {
+                    resolve('Simulated auger turned off.');
+                }
+            });
+
+        },
+        // Cycles the auger using the two functions above this one (functions.auger.on() and functions.auger.off())
+        // Sleeps in between cycles using functions.sleep()
+        cycle(gpio) {
+            return new Promise((resolve) => {
+                // Turn the auger on
+                this.on(gpio).then((res) => {
+                    // Log action if in debug mode
+                    // if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                    // Sleep for the time set in env variables
+                    functions.sleep(config.intervals.augerOn).then((res) => {
+                        // Log action if in debug mode
+                        // if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                        // Turn the auger off
+                        this.off(gpio).then((res) => {
+                            // Log action if in debug mode
+                            // if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                            // Sleep for the time set in env variables
+                            functions.sleep(config.intervals.augerOff).then((res) => {
+                                // Log action if in debug mode
+                                // if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res}`);
+                                // Resolve the promise, letting the main script know the cycle is complete
+                                resolve(`Auger cycled (${config.intervals.augerOn}/${config.intervals.augerOff})`);
+                            });
+                        });
+                    });
+                });
+            });
+        },
+    },
+    commands: {
+        // Prepare the stove for starting
+        startup() {
+            // Basic startup just enables the auger
+            const enableAugerQuery = "UPDATE status SET value = 1 WHERE key = 'auger'";
+            dbfn.run(enableAugerQuery).then(res => {
+                console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Auger enabled.`);
+                return;
+            }).catch(err => console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: ${err}`));
+        },
+        shutdown() {
+            // Basic shutdown only needs to disable the auger
+            const disableAugerQuery = "UPDATE status SET value = 0 WHERE key = 'auger'";
+            dbfn.run(disableAugerQuery).then(res => {
+                if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: ${res.status}`);
+                console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Auger disabled.`);
+                return;
+            }).catch(err => console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] E: ${err}`));
+        },
+        // Pauses the script for the time defined in env variables
+        pause() {
+            return new Promise((resolve) => {
+                if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Pausing for ${config.intervals.pause}ms`);
+
+                functions.sleep(config.intervals.pause).then((res) => {
+                    if (process.env.DEBUG) console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Pause finished.`);
+                    resolve();
+                });
+            });
+        },
+        // Reload the environment variables on the fly
+        reload(envs) {
+            return new Promise((resolve) => {
+                // Re-require dotenv because inheritance in js sucks
+                const dotenv = require('dotenv').config({ override: true });
+                // Delete the reload file
+                fs.unlink('./reload', (err) => {
+                    if (err) throw err;
+                    if (process.env.DEBUG) console.log('Deleted reload file.');
+                });
+                // Print out the new environment variables
+                // This should be printed regardless of debug status, maybe prettied up TODO?
+                console.log('Reloaded environment variables.');
+                console.log(`ONTIME=${config.intervals.augerOn}\nOFFTIME=${config.intervals.augerOff}\nPAUSETIME=${config.intervals.pause}\nDEBUG=${process.env.DEBUG}\nONPI=${process.env.ONPI}`);
+                // Resolve the promise, letting the main script know we're done reloading the variables and the cycle can continue
+                resolve();
+            });
+
+        },
+        refreshConfig() {
+            return new Promise((resolve, reject) => {
+                // When the reload button is pressed, the call to this function will contain new config values
+                // {
+                //     augerOff: 500,
+                //     augerOn: 1500,
+                //     pause: 5000
+                // }
+                // if (newSettings != undefined) {
+                //     config.intervals.augerOff = newSettings.augerOff;
+                //     config.intervals.augerOn = newSettings.augerOn;
+                //     console.log(`[${(Date.now() - config.timestamps.procStart)/1000}] I: Intervals updated: (${newSettings.augerOn}/${newSettings.augerOff})`);
+
+                // }
+                // fs.writeFile('./config.json', JSON.stringify(config), (err) => {
+                //     if (err) reject(err);
+                //     resolve();
+                // });
+
+                // Get status
+                const selectStatusQuery = "SELECT * FROM status";
+                dbfn.all(selectStatusQuery).then(res => {
+                    let { status } = config;
+                    let { rows } = res;
+                    status.auger = rows.auger;
+                    status.blower = rows.blower;
+                    status.igniter = rows.igniter;
+                    status.igniterFinished = rows.igniter_finished;
+                    status.pof = rows.proof_of_fire;
+                    status.shutdownNextCycle = rows.shutdown_next_cycle;
+                    status.vacuum = rows.vacuum;
+
+                    // Get timestamps
+                    const selectTimestampsQuery = "SELECT * FROM timestamps";
+                    dbfn.all(selectTimestampsQuery).then(res => {
+                        let { timestamps } = config;
+                        let { rows } = res;
+                        timestamps.blowerOff = rows.blower_off;
+                        timestamps.blowerOn = rows.blower_on;
+                        timestamps.igniterOff = rows.igniter_off;
+                        timestamps.igniterOn = rows.igniter_on;
+                        timestamps.procStart = rows.process_start;
+
+                        // Get intervals
+                        const selectIntervalsQuery = "SELECT * FROM intervals";
+                        dbfn.all(selectIntervalsQuery).then(res => {
+                            let { intervals } = config;
+                            let { rows } = res;
+                            intervals.augerOff = rows.auger_off;
+                            intervals.augerOn = rows.auger_on;
+                            intervals.blowerStop = rows.blower_stop;
+                            intervals.igniterStart = rows.igniter_start;
+                            intervals.pause = rows.pause;
+                            resolve({ "status": "Refreshed the config", "config": config });
+                        }).catch(err => {
+                            reject(err);
+                            return;
+                        });
+                    }).catch(err => {
+                        reject(err);
+                        return;
+                    });
+                }).catch(err => {
+                    reject(err);
+                    return;
+                });
+            });
+        },
+        quit() {
+            functions.commands.shutdown();
+            functions.auger.off(gpio).then(res => {
+                console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Exiting app...`);
+                process.exit(0);
+            }).catch(err => {
+                console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] E: Unable to shut off auger, rebooting Pi!`);
+                exec('shutdown -r 0');
+            });
+        }
+    },
+    // Sleeps for any given milliseconds
+    sleep(ms) {
+        return new Promise((resolve) => {
+            // if (process.env.DEBUG) console.log(`Sleeping for ${ms}ms`);
+            // Function to be called when setTimeout finishes
+            const finish = () => {
+                // Resolve the promise 
+                resolve(`Slept for ${ms}ms`);
+            };
+            // The actual sleep function, sleeps for ms then calls finish()
+            setTimeout(finish, ms);
+        });
+    },
+    // Initializes rpi-gpio, or resolves if not on a raspberry pi
+    init(gpio) {
+        fs.readFile('./templates/config.json', (err, data) => {
+            fs.writeFile('./config.json', data, (err) => {
+                if (err) throw err;
+                config = require('../config.json');
+            })
+        })
+        // TODO this boot splash needs updating
+        return new Promise((resolve, reject) => {
+            // Boot/About/Info
+            console.log(`== Lennox Winslow PS40
+== Pellet Stove Control Panel
+== Author: Skylar Grant
+== Version: v${package.version}
+==
+== Startup Time: ${new Date().toISOString()}
+==
+== Environment variables:
+== == ONTIME=${config.intervals.augerOn}
+== == OFFTIME=${config.intervals.augerOff}
+== == PAUSETIME=${config.intervals.pause}
+== == DEBUG=${process.env.DEBUG}
+== == ONPI=${process.env.ONPI}`);
+            // Set up GPIO 4 (pysical pin 7) as output, then call functions.auger.ready()
+            if (process.env.ONPI == 'true') {
+                // Init the Auger pin
+                gpio.setup(augerPin, gpio.DIR_OUT, (err) => {
+                    if (err) reject(err);
+                    if (process.env.DEBUG) console.log('== Auger pin initialized.');
+                    // Resolve the promise now that all pins have been initialized
+                    resolve('== GPIO Initialized.');
+                });
+            } else {
+                // Resolve the promise
+                resolve('== GPIO Not Available');
+            }
+        });
+    },
+    checkForQuit() {
+        if (config.status.shutdownNextCycle == 1) {
+            console.log(`[${(Date.now() - config.timestamps.procStart) / 1000}] I: Exiting Process!`);
+            process.exit();
+        }
+        return new Promise((resolve, reject) => {
+            if (fs.existsSync('./quit')) {
+                fs.unlink('./quit', err => {
+                    if (err) console.log('Error removing the quit file: ' + err);
+                    config.status.shutdownNextCycle = 1;
+                    config.status.auger = 0;
+                    resolve();
+                });
+            } else {
+                resolve('Not shutting down');
+            }
+        });
+    },
+    time(stamp) {
+        const time = new Date(stamp);
+        return `${time.getHours()}:${time.getMinutes()}:${time.getSeconds()}`;
+    }
+}
+
+// Export the above object, functions, as a module
+module.exports = { functions, dbfn };

package.json

@@ -0,0 +1,15 @@
+{
+    "name": "pscontrolpanel",
+    "version": "0.2.1",
+    "requires": true,
+    "packages": {},
+    "dependencies": {
+        "body-parser": "^1.20.1",
+        "dotenv": "^16.0.3",
+        "ejs": "^3.1.8",
+        "express": "^4.18.2",
+        "rpi-gpio": "^2.1.7",
+        "sequelize": "^6.28.0",
+        "sqlite3": "^5.1.4"
+    }
+}

src/assets/HestiaClasses.js

@@ -1,133 +0,0 @@
-export class State {
-    constructor(config) {
-        this.igniter = {
-            on: false,
-            name: "igniter",
-            topic: config.mqtt.topics.igniter,
-            publisher: 'front',
-            power: (communicator) => {
-                // This *should* toggle the state, asks if state is true, if it is set it false, otherwise set it true
-                this.igniter.on ? this.igniter.on = false : this.igniter.on = true;
-                communicator.send(config.mqtt.topics.igniter, JSON.stringify(this.igniter));
-            }
-        };
-
-        this.exhaust = {
-            on: false,
-            name: "exhaust",
-            topic: config.mqtt.topics.exhaust,
-            publisher: 'front',
-            power: (communicator) => {
-                // This *should* toggle the state, asks if state is true, if it is set it false, otherwise set it true
-                this.exhaust.on ? this.exhaust.on = false : this.exhaust.on = true;
-                communicator.send(config.mqtt.topics.exhaust, JSON.stringify(this.exhaust));
-            }
-        };
-
-        this.auger = {
-            on: false,
-            name: "auger",
-            feedRate: 500,
-            topic: config.mqtt.topics.auger,
-            publisher: 'front',
-            power: (communicator) => {
-                // This *should* toggle the state, asks if state is true, if it is set it false, otherwise set it true
-                this.auger.on ? this.auger.on = false : this.auger.on = true;
-                communicator.send(config.mqtt.topics.auger, JSON.stringify(this.auger));
-            }
-        };
-
-        this.pof = {
-            on: false,
-            name: "pof",
-            topic: config.mqtt.topics.pof,
-            publisher: 'backend',
-            power: (communicator) => {
-                // This *should* toggle the state, asks if state is true, if it is set it false, otherwise set it true
-                this.pof.on ? this.pof.on = false : this.pof.on = true;
-                communicator.send(config.mqtt.topics.pof, JSON.stringify(this.pof));
-            }
-        };
-
-        this.vacuum = {
-            on: false,
-            name: "vacuum",
-            topic: config.mqtt.topics.vacuum,
-            publisher: 'backend',
-            power: (communicator) => {
-                // This *should* toggle the state, asks if state is true, if it is set it false, otherwise set it true
-                this.vacuum.on ? this.vacuum.on = false : this.vacuum.on = true;
-                communicator.send(config.mqtt.topics.vacuum, JSON.stringify(this.vacuum));
-            }
-        };
-        console.log(`State initialized.`)
-    };
-};
-
-export class Communicator {
-    constructor(state) {
-        this.publisher = state.publisher;
-        return this;
-    }
-
-    init(state, config) {
-        // Connect to the MQTT Broker
-        console.log(`Attempting MQTT connection to broker: ${config.mqtt.address}, with username: ${config.mqtt.username}`);
-        this.client = mqtt.connect(config.mqtt.address, {
-            username: config.mqtt.username,
-            password: config.mqtt.password
-        });
-        const { client } = this;
-
-        client.on('connect', () => {
-            console.log('Connected to MQTT broker');
-            // Subscribe to status topics
-            config.states.elements.forEach(element => {
-                client.subscribe(state[element].topic, (err) => {
-                    if (!err) {
-                        console.log(`Subscribed to ${state[element].topic}`);
-                    }
-                });
-            });
-            
-        });
-
-        // Handle when the Broker sends us a message
-        client.on('message', (topic, message) => {
-            const msgStr = message.toString();
-            const msgJson = JSON.parse(msgStr);
-            console.log(`Message received on topic ${topic}: ${msgStr}`);
-            console.log(msgJson);
-            state[msgJson.name].on = msgJson.on;
-            window.refreshState(window.document, state);
-        });
-    }
-
-    // Publish a message to the MQTT Broker
-    send(topic, message) {
-        // Publish with retain flag set to true
-        this.client.publish(topic, message, { retain: true }, (err) => {
-            if (err) {
-                console.error('Failed to publish message:', err);
-            } else {
-                console.log('Message published and retained on topic:', topic);
-            }
-        });
-    }
-
-    // Send startup command
-    startup() {
-        this.send('hestia/command/startup', JSON.stringify({
-            "publisher": "front",
-            "timestamp": Date.now()
-        }));
-    }
-
-    // Send shutdown command
-    shutdown() {
-        this.send('hestia/command/shutdown', JSON.stringify({
-            "publisher": "front",
-            "timestamp": Date.now()
-        }));
-    }
-}

src/assets/hestia.js

@@ -1,75 +0,0 @@
-import { Communicator, State } from './HestiaClasses.js';
-const config = {
-    "mqtt": {
-        "address": "wss://mqtt.3411.one",
-        "username": "hestia",
-        "password": "hestia",
-        "topics": {
-            "igniter": "hestia/status/igniter",
-            "exhaust": "hestia/status/exhaust",
-            "auger": "hestia/status/auger",
-            "pof": "hestia/status/pof",
-            "vacuum": "hestia/status/vacuum"
-        }
-    },
-    "states": {
-        "elements": [
-            "igniter",
-            "exhaust",
-            "auger",
-            "pof",
-            "vacuum"
-        ]
-    }
-};
-const psState = new State(config);
-const comms = new Communicator(psState);
-
-export function refreshState(doc, state) {
-    const igniterStatus = doc.getElementById("igniter-status");
-    const exhaustStatus = doc.getElementById("exhaust-status");
-    const augerStatus = doc.getElementById("auger-status");
-    const pofStatus = doc.getElementById("pof-status");
-    const vacuumStatus = doc.getElementById("vacuum-status");
-    let statusString;
-
-    statusString = '';
-    if (state.igniter.on) statusString = "On"; else statusString = "Off";
-    igniterStatus.innerHTML = statusString;
-
-    statusString = '';
-    if (state.exhaust.on) statusString = "On"; else statusString = "Off";
-    exhaustStatus.innerHTML = statusString;
-
-    statusString = '';
-    if (state.auger.on) statusString = "On"; else statusString = "Off";
-    augerStatus.innerHTML = statusString;
-
-    statusString = '';
-    if (state.pof.on) statusString = "On"; else statusString = "Off";
-    pofStatus.innerHTML = statusString;
-
-    statusString = '';
-    if (state.vacuum.on) statusString = "On"; else statusString = "Off";
-    vacuumStatus.innerHTML = statusString;
-    
-    console.log('State refreshed.');
-}
-
-export function togglePower(element) {
-    psState[element].power(comms);
-    refreshState(window.document, psState);
-}
-
-export function startup() {
-    comms.startup();
-}
-
-export function shutdown() {
-    comms.shutdown();
-}
-
-window.onload = function() {
-    comms.init(psState, config);
-    refreshState(window.document, psState);
-};

src/index.html

@@ -1,104 +0,0 @@
-<!DOCTYPE html>
-<html lang="en">
-
-<head>
-    <meta charset="UTF-8">
-    <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <title>Hestia</title>
-    <script src="https://cdn.tailwindcss.com"></script>
-    <script src="https://unpkg.com/mqtt/dist/mqtt.js"></script>
-    <script type="module">
-        import { refreshState, togglePower, startup, shutdown } from './assets/hestia.js';
-        window.togglePower = togglePower;
-        window.startup = startup;
-        window.shutdown = shutdown;
-        window.refreshState = refreshState;
-    </script>
-</head>
-
-<body class="bg-gray-900 text-white font-sans">
-    <marquee style="color: yellow; background-color: red; font-weight: bold;">
-        PELLET STOVE FREE TRIAL HAS ENDED, PLEASE PURCHASE A LICENSE NOW!
-      </marquee>
-      
-    <div class="container mx-auto py-8 max-w-md">
-        <h1 class="text-3xl text-center text-purple-400 font-bold mb-8">Hestia Control Panel</h1>
-
-        <div class="controls-container bg-gray-800 p-6 rounded-lg shadow-lg space-y-4">
-            <table class="min-w-full bg-gray-900 text-white rounded-lg shadow-lg">
-                <thead>
-                    <tr class="border-b border-gray-700">
-                        <th class="py-2 px-4 text-left text-purple-400">Element</th>
-                        <th class="py-2 px-4 text-left text-purple-400">Status</th>
-                    </tr>
-                </thead>
-                <tbody>
-                    <tr class="border-b border-gray-700">
-                        <td class="py-2 px-4">Igniter</td>
-                        <td class="py-2 px-4" id="igniter-status">Placeholder</td>
-                    </tr>
-                    <tr class="border-b border-gray-700">
-                        <td class="py-2 px-4">Exhaust</td>
-                        <td class="py-2 px-4" id="exhaust-status">Placeholder</td>
-                    </tr>
-                    <tr class="border-b border-gray-700">
-                        <td class="py-2 px-4">Auger</td>
-                        <td class="py-2 px-4" id="auger-status">Placeholder</td>
-                    </tr>
-                    <!-- PoF -->
-                    <tr class="border-b border-gray-700">
-                        <td class="py-2 px-4">Proof of Fire</td>
-                        <td class="py-2 px-4" id="pof-status">Placeholder</td>
-                    </tr>
-                    <!-- Vacuum -->
-                    <tr>
-                        <td class="py-2 px-4">Vacuum</td>
-                        <td class="py-2 px-4" id="vacuum-status">Placeholder</td>
-                    </tr>
-                </tbody>
-            </table>
-            <div class="button-container flex">
-                <input class="btn bg-gray-700 hover:bg-purple-600 text-white py-2 w-full rounded mx-auto" type="submit" id="igniter-toggle-btn" value="Toggle Igniter" name="igniterToggle" onclick="togglePower('igniter')">
-            </div>
-            <div class="button-container flex mt-4">
-                <input class="btn bg-gray-700 hover:bg-purple-600 text-white py-2 w-full rounded mx-auto" type="submit" id="exhaust-toggle-btn" value="Toggle Exhaust" name="exhaustToggle" onclick="togglePower('exhaust')">
-            </div>
-            <div class="button-container flex mt-4">
-                <input class="btn bg-gray-700 hover:bg-purple-600 text-white py-2 w-full rounded mx-auto" type="submit" id="auger-toggle-btn" value="Toggle Auger" name="augerToggle" onclick="togglePower('auger')">
-            </div>
-            <div class="button-container flex mt-4">
-                <input class="btn bg-gray-700 hover:bg-purple-600 text-white py-2 w-full rounded mx-auto" type="submit" id="start-btn" value="Startup" name="startButton" onclick="startup()">
-            </div>
-            <div class="button-container flex mt-4">
-                <input class="btn bg-gray-700 hover:bg-purple-600 text-white py-2 w-full rounded mx-auto" type="submit" id="stop-btn" value="Shutdown" name="stopButton" onclick="shutdown()">
-            </div>
-            <form action="/" method="post">
-                <!-- Set feed rates -->
-                <div class="form-group mt-4">
-                    <label for="feedRate" class="block text-sm font-medium text-purple-400">Feed Rate:</label>
-                    <select name="feedRate" class="form-control bg-gray-700 text-white mt-1 block w-full rounded border-gray-600 focus:border-purple-500 focus:ring-purple-500 py-2 px-4">
-                        <option value="500">Low</option>
-                        <option value="625">Medium-Low</option>
-                        <option value="750">Medium</option>
-                        <option value="875">Medium-High</option>
-                        <option value="1000">High</option>
-                    </select>
-                </div>
-                <div class="button-container flex justify-end mt-4">
-                    <input class="btn bg-purple-600 hover:bg-purple-700 text-white py-2 px-4 rounded w-full" type="submit" id="reload" value="Set Feed Rate" name="reload">
-                </div>
-            </form>
-        </div>
-
-        <div class="text-center my-8">
-            <img src="./assets/dancing_jesus.gif" class="img-fluid mx-auto rounded-lg shadow-lg" alt="Dancing Jesus">
-        </div>
-
-        <div class="controls-container bg-gray-800 p-6 rounded-lg shadow-lg" id="quitContainer">
-            <input class="btn bg-green-200 hover:bg-green-400 text-black font-bold py-2 px-4 rounded w-full" type="submit" id="reload" value="Refresh State" name="refresh">
-            <input class="btn bg-red-600 hover:bg-red-700 text-white py-2 font-bold rounded w-full mt-4" type="submit" id="quit" value="Quit!!" name="quit">
-        </div>
-    </div>
-</body>
-
-</html>

templates/config.json

@@ -0,0 +1,30 @@
+{
+    "status": {
+        "igniter": 0,
+        "blower": 0,
+        "auger": 0,
+        "igniterFinished": false,
+        "shutdown": 0,
+        "vacuum": 0,
+        "pof": 0,
+        "shutdownNextCycle": 0
+    },
+    "timestamps": {
+        "procStart": 0,
+        "blowerOn": 0,
+        "blowerOff": 0,
+        "igniterOn": 0,
+        "igniterOff": 0
+    },
+    "intervals": {
+        "augerOn": "600",
+        "augerOff": "1400",
+        "pause": "3000",
+        "igniterStart": "5000",
+        "blowerStop": "5000"
+    },
+    "web": {
+        "port": 8080,
+        "ip": "0.0.0.0"
+    }
+}

www/public/main.css

@@ -0,0 +1,98 @@
+html, body {
+    padding: 0;
+    margin: 0;
+    background-color: #333;
+    color: aqua;
+    font-family: sans-serif;
+}
+
+#title {
+    text-align: center;
+    font-size: 35px;
+    margin-top: 10px;
+    padding-bottom: 15px;
+}
+
+#title a {
+    text-decoration: none;
+    color: inherit;
+}
+
+#safeties {
+    text-align: center;
+}
+
+.controls-container {
+    text-align: center;
+}
+
+#buttons button {
+    margin: 20px 5px;
+    font-size: 20px;
+    width: 150px;
+    height: 30px;
+}
+
+.controls-container input {
+    margin: 5px;
+}
+
+.subheading {
+    font-size: 20px;
+    font-weight: bold;
+    text-align: center;
+}
+
+#log-container {
+    text-align: center;
+}
+
+#log-area {
+    width: 100%;
+    height: 500px;
+    background-color: aqua;
+    color: aqua;
+}
+
+#trial {
+    display:;
+    color: yellow;
+    font-size: 20px;
+    background-color: red;
+}
+
+.button-container {
+    padding: 0;
+    margin-top: 20px;
+    margin-bottom: 20px;
+    text-align: center;
+}
+
+.btn {
+    background-color: #333;
+    color: aqua;
+}
+
+.button-selected {
+    margin: 5px;
+    border-width: 0px;
+    font-family: times;
+    font-size: 20px;
+    height: 35px;
+    width: 100px;
+    border-top-left-radius: 0px;
+    border-bottom-left-radius: 0px;
+    border-top-right-radius: 0px;
+    border-bottom-right-radius: 0px;
+}
+
+table {
+    margin: 0 auto;
+    color: aqua !important;
+}
+
+table, th, td {
+    border: 1px solid;
+    border-collapse: collapse;
+    padding: 3px;
+}

www/views/index.html

@@ -0,0 +1,150 @@
+<!DOCTYPE html>
+<html>
+    <head>
+        <title>Hestia Web Portal</title>
+        <meta charset="utf-8">
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <!-- Bootstrap -->
+        <link href="https://cdn.jsdelivr.net/npm/bootstrap@5.3.0-alpha1/dist/css/bootstrap.min.css" rel="stylesheet" integrity="sha384-GLhlTQ8iRABdZLl6O3oVMWSktQOp6b7In1Zl3/Jr59b6EGGoI1aFkw7cmDA6j6gD" crossorigin="anonymous">
+        <script src="https://cdn.jsdelivr.net/npm/bootstrap@5.3.0-alpha1/dist/js/bootstrap.bundle.min.js" integrity="sha384-w76AqPfDkMBDXo30jS1Sgez6pr3x5MlQ1ZAGC+nuZB+EYdgRZgiwxhTBTkF7CXvN" crossorigin="anonymous"></script>
+        <link rel="stylesheet" href="/main.css">
+    </head>
+    <body onload="refreshData()" class="container">
+        <script>
+                // Get the config file
+                const config = <%- config %>;
+                console.log(<%- config %>);
+        </script>
+        <%- include('trial.html') -%>
+        <div id="title" class="text-center mb-4">
+            <a href='./'>Hestia Web Portal</a>
+        </div>
+        <div id="status" class="row">
+            <!--
+                | Auger     | rows[0].cells[1] | On Time  | rows[0].cells[3] |
+                | Feed Rate | rows[1].cells[1] | Off Time | rows[1].cells[3] |
+            -->
+
+            <table id="status-table" class="table table-bordered col-sm-12 col-md-6">
+                <tr>
+                    <td>Auger</td>
+                    <td></td>
+                    <td>On Time</td>
+                    <td></td>
+                </tr>
+                <tr>
+                    <td>Feed Rate</td>
+                    <td></td>
+                    <td>Off Time</td>
+                    <td></td>
+                </tr>
+            </table>            
+        </div>
+        
+        
+        
+        <div class="controls-container">
+            <form action="/" method="post">
+                <!-- Start | Shutdown | Reload Settings -->
+                <div class="button-container d-flex justify-content-between">
+                    <input class="btn btn-outline-secondary" type="submit" id="ignite" value="Enable Auger" name="start">
+                    <input class="btn btn-outline-secondary" type="submit" id="shutdown" value="Disable Auger" name="shutdown">
+                </div>
+                <!-- Set feed rates -->
+                <div class="form-group">
+                    <label for="feedRate">Feed Rate: </label>
+                    <select name="feedRate" class="form-control" id="feed-rate-select">
+                        <option value="600">Low</option>
+                        <option value="800">Medium</option>
+                        <option value="1000">High</option>
+                    </select>
+                </div>
+                <div class="button-container d-flex justify-content-end">
+                    <input class="btn btn-outline-secondary" type="submit" id="reload" value="Set Feed Rate" name="reload">
+                </div>
+            </form>
+        </div>
+        <!-- <div class="text-center my-4">
+            <img src="./dancing_jesus.gif" class="img-fluid">
+        </div> -->
+        <div class="controls-container">
+            <form action="/" method="POST">
+                <input class="btn btn-danger" type="submit" id="quit" value="Quit!!" name="quit" style="visibility: hidden;">
+            </form>
+        </div>
+        <!-- <script src="./main.js"></script> -->
+        <script>
+            function sleep(ms) {
+                return new Promise((resolve, reject) => {
+                    setTimeout(() => {
+                        resolve();
+                    }, ms);
+                });
+            }
+
+            function readJSON(path) {
+                var request = new XMLHttpRequest();
+                request.open("GET", path, false);
+                request.send(null)
+                var JSONObj = JSON.parse(request.responseText);
+                return JSONObj;
+            }
+
+            function parseStatus(data) {
+                switch (data) {
+                    case "0":
+                        return "Off";
+                        break;
+                    case "1":
+                        return "On";
+                        break
+                    default:
+                        return "Error: " + data;
+                        break;
+                }
+            }
+
+            function refreshData() {
+                // const log = document.getElementById('log-area');
+                // log.contentWindow.location.reload();
+                // sleep(100).then(() => {
+                    // document.getElementById('log-area').contentWindow.scrollTo(0, 9999999999);
+                // });
+
+                // Get the elements we need to update
+                const statusTable = document.getElementById('status-table');
+                const augerStatus = statusTable.rows[0].cells[1];
+                const augerOn = statusTable.rows[0].cells[3];
+                const augerOff = statusTable.rows[1].cells[3];
+                const feedRate = statusTable.rows[1].cells[1];
+                const feedRateSelect = document.getElementById('feed-rate-select');
+
+                // console.log(config);
+
+                augerStatus.innerHTML = parseStatus(config.status.auger);
+                augerOn.innerHTML = config.intervals.augerOn;
+                augerOff.innerHTML = config.intervals.augerOff;
+
+                switch (config.intervals.augerOn) {
+                    case '600':
+                        feedRate.innerHTML = 'Low';
+                        feedRateSelect.selectedIndex = 0;
+                        break;
+                    case '800':
+                        feedRate.innerHTML = 'Medium';
+                        feedRateSelect.selectedIndex = 1;
+                        break;
+                    case '1000':
+                        feedRate.innerHTML = 'High';
+                        feedRateSelect.selectedIndex = 2;
+                        break;
+                    default:
+                        feedRate.innerHTML = 'Unknown';
+                        break;
+                }
+                feedRate.value = config.intervals.augerOn;
+            };
+        </script>
+    </body>
+</html>
+

www/views/index.html.bak

@@ -0,0 +1,65 @@
+<!DOCTYPE html>
+<html>
+    <head>
+        <title>Hestia Web Portal</title>
+        <link rel="stylesheet" href="/main.css">
+    </head>
+    <body onload="refreshData()">
+        <%- include('trial.html') -%>
+        <div id="title"><a href='./'>Hestia Web Portal</a></div>
+        <div id="status">
+            <!--
+                | Auger     | rows[0].cells[1] | On Time  | rows[0].cells[3] |
+                | Feed Rate | rows[1].cells[1] | Off Time | rows[1].cells[3] |
+            -->
+
+            <table id="status-table">
+                <tr>
+                    <td>Auger</td>
+                    <td></td>
+                    <td>On Time</td>
+                    <td></td>
+                </tr>
+                <tr>
+                    <td>Feed Rate</td>
+                    <td></td>
+                    <td>Off Time</td>
+                    <td></td>
+                </tr>
+            </table>            
+        </div>
+        
+        
+        
+        <div class="controls-container">
+            <form action="/" method="post">
+                <!-- Start | Shutdown | Reload Settings -->
+                <div class="button-container">
+                    <input class="button-unselected" type="submit" id="ignite" value="Enable Auger" name="start"><input class="button-unselected" type="submit" id="shutdown" value="Disable Auger" name="shutdown"><br>
+                </div>
+                <!-- Set feed rates -->
+                <label for="feedRate">Feed Rate: </label>
+                <select name="feedRate">
+                    <option value="600">Low</option>
+                    <option value="800">Medium</option>
+                    <option value="1000">High</option>
+                </select>
+                <div class="button-container">
+                    <input class="button-unselected" type="submit" id="reload" value="Reload" name="reload">
+                </div>
+            </form>
+        </div>
+        <div class="button-container">
+            <img src="./dancing_jesus.gif">
+        </div>
+        <div id="log-container">
+            <iframe id="log-area" src="log.txt"></iframe>
+        </div>
+        <div class="controls-container">
+            <form action="/" method="POST">
+                <input class="button-unselected" type="submit" id="quit" value="Quit!!" name="quit" style="visibility: hidden;">
+            </form>
+        </div>
+        <script src="./main.js"></script>
+    </body>
+</html>

www/views/trial.html

@@ -0,0 +1,3 @@
+<body>
+    <marquee id="trial">YOUR FREE TRIAL HAS ENDED, PLEASE PURCHASE A PELLET STOVE SUBSCRIPTION</marquee>
+</body>