diff --git a/Scanner-AV-Streaming-on-VM-in-Unraid.md b/Scanner-AV-Streaming-on-VM-in-Unraid.md
index b0fd488..43fa900 100644
--- a/Scanner-AV-Streaming-on-VM-in-Unraid.md
+++ b/Scanner-AV-Streaming-on-VM-in-Unraid.md
@@ -18,9 +18,9 @@ This article will go through my setup for hosting a scanner A/V stream from an U
 
 ### Set up the VM
 1. Download Ubuntu Server ISO to UnRAID server
-2. Create an Ubuntu VM in UnRAID
-  -- Pass through a few CPU cores, at least to start with, this will make installation faster  
-  -- Choose 2048-4096MB min ram, at least. Again can be scaled back after installation  
+2. Create an Ubuntu VM in UnRAID  
+  -- Pass through 2-4 CPU cores for installation, can be scaled back later  
+  -- Choose 2048-4096MB minimum RAM, at least.  
   -- 10GB vdisk should be enough, 20GB is what I used.  
   -- Leave graphic card as is, you'll need VNC to complete the initial installation  
   -- Assign the sound card to the VM  
@@ -30,9 +30,9 @@ This article will go through my setup for hosting a scanner A/V stream from an U
 
 ### Set up the Software Stack
 1. Run these commands
-```
+```sh
 sudo apt update && sudo apt upgrade -y
-sudo apt install ffmpeg
+sudo apt install ffmpeg -y
 wget https://github.com/bluenviron/mediamtx/releases/download/v1.8.4/mediamtx_v1.8.4_linux_amd64.tar.gz
 tar -xvf mediamtx_v1.8.4_linux_amd64.tar.gz
 sudo mkdir /usr/local/share/mediamtx
@@ -40,7 +40,7 @@ sudo mv mediamtx /usr/local/bin/
 sudo mv mediamtx.yml /usr/local/share/mediamtx/
 ```
 2. Edit mediamtx.yml and remove the `paths:` at the end, replacing with:
-```
+```yaml
 paths:
   scanner:
     source: publisher